Display the status of Internet Group Management Protocol (IGMP) snoop.
show ip igmp snooping
show ip igmp snooping vrf WORD<1-16>
show ip igmp snooping vrfids WORD<0-512>
None
Privileged EXEC
This command is not supported on a node configured as the DvR Leaf within a DvR domain.
The show ip igmp snooping command displays the following information:
| 
                         Output field  | 
                     
                         Description  | 
                  
|---|---|
| 
                         IFINDEX  | 
                     
                         Indicates the interface index number.  | 
                  
| 
                         SNOOP ENABLE  | 
                     
                         Indicates the status of IGMP snoop.  | 
                  
| 
                         PROXY SNOOP ENABLE  | 
                     
                         Indicates the status of IGMP proxy snoop.  | 
                  
| 
                         SSM SNOOP ENABLE  | 
                     
                         Indicates the status of IGMP Source Specific Multicast (SSM) snoop.  | 
                  
| 
                         STATIC MROUTER PORTS  | 
                     
                         Indicates the set of ports in this VLAN that provide connectivity to an IP multicast router.  | 
                  
| 
                         ACTIVE MROUTER PORTS  | 
                     
                         Indicates the active ports.  | 
                  
| 
                         MROUTER EXPIRATION TIME  | 
                     
                         Indicates the multicast querier router aging timeout in seconds.  | 
                  
| 
                         SNOOP QUERIER ENABLE  | 
                     
                         Indicates if the IGMP Layer 2 Querier feature is enabled.  | 
                  
| 
                        
                         CONFIGURED QUERIER ADDRESS  | 
                     
                         Indicates the IP address of the IGMP Layer 2 querier. Note: 
                            
                     If the IP IGMP mode on the switch is spb-multicast then it uses the routed SPB querier address instead of the snoop querier address.  | 
                  
| 
                         DYNAMIC DOWNGRADE VERSION  | 
                     
                         Indicates if the switch downgrades the version of IGMP to handle older query messages.  | 
                  
| 
                         COMPATIBILITY MODE  | 
                     
                         Indicates if IGMPv3 is compatible with IGMPv2  | 
                  
The following example displays the status of IGMP snoop.
Switch:1#show ip igmp snooping
================================================================================
                          Igmp Snooping - GlobalRouter
================================================================================
IFINDEX SNOOP   PROXY   SSM     STATIC           ACTIVE           MROUTER
        ENABLE  SNOOP   SNOOP   MROUTER          MROUTER          EXPIRATION
                ENABLE  ENABLE  PORTS            PORTS            TIME
--------------------------------------------------------------------------------
V2      false   false   false                                     0
V3      false   false   false                                     0
V4      true    false   false                                     0
V200    false   false   false                                     0
IFINDEX SNOOP   CONFIGURED      DYNAMIC   COMPATIBILITY
        QUERIER QUERIER         DOWNGRADE MODE
        ENABLE  ADDRESS         VERSION
--------------------------------------------------------------------------------
V2      false   0.0.0.0         enable    disable
V3      false   0.0.0.0         enable    disable
V4      true    192.0.2.1       enable    disable
V200    false   0.0.0.0         enable    disable
4 out of 4 entries displayed