ip forward-protocol udp port

Syntax

• default ip forward-protocol udp port {slot/port[/sub-port]} broadcastmask {A.B.C.D}

• default ip forward-protocol udp port {slot/port[/sub-port]} broadcastmask {A.B.C.D} maxttl <1-16>

• default ip forward-protocol udp port {slot/port[/sub-port]} maxttl <1-16>

• default ip forward-protocol udp port {slot/port} portfwdlist <1-1000>

• ip forward-protocol udp port {slot/port[/sub-port]} broadcastmask {A.B.C.D}

• ip forward-protocol udp port {slot/port[/sub-port]} broadcastmask {A.B.C.D} maxttl <1-16>

• ip forward-protocol udp port {slot/port[/sub-port]} maxttl <1-16>

• ip forward-protocol udp port {slot/port[/sub-port]} portfwdlist <1-1000>

• no ip forward-protocol udp port {slot/port[/sub-port]} broadcastmask {A.B.C.D}

• no ip forward-protocol udp port {slot/port[/sub-port]} broadcastmask {A.B.C.D} maxttl <1-16>

• no ip forward-protocol udp port {slot/port[/sub-port]} maxttl <1-16>

• no ip forward-protocol udp port {slot/port[/sub-port]} portfwdlist <1-1000>

Command Parameters

broadcastmask {A.B.C.D}

Sets the interface broadcast mask (the interface broadcast mask can be different from the interface mask). A.B.C.D is an IP address in a.b.c.d format.

maxttl <1-16>

Sets the maximum time-to-live value (TTL) for the interface. The range is 1 to 16.

portfwdlist <1-1000>

Creates a port forwarding list in the range of 1 to 1000.

Default

None

Command Mode

GigabitEthernet Interface Configuration