rmon history

Creates a history control interface.

Syntax

default rmon history <1-65535>
default rmon history <1-65535> buckets
default rmon history <1-65535> interval
default rmon history <1-65535> owner
no rmon history <1-65535>
rmon history <1-65535> {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
rmon history <1-65535> {slot/port[/sub-port][-slot/port[/sub-port]][,...]} buckets <1-65535>
rmon history <1-65535> {slot/port[/sub-port][-slot/port[/sub-port]][,...]} interval <1-3600>
rmon history <1-65535> {slot/port[/sub-port][-slot/port[/sub-port]][,...]} owner WORD<1-127>

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
<1-65535>: Specifies the index number of the history control interface.
buckets <1-65535>: Specifies the number of buckets requested. The default is 50.
interval <1-3600>: Specifies the the time interval in seconds over which the data is sampled for each bucket. The default is 1800.
owner WORD<1-127>: Specifies the name of the entry owner. The default value is CLI if the entry is configured using CLI. The default is SNMP if the entry is configured using EDM or SNMP.

None

Global Configuration