View Application Visibility - RF-Domain App-Category Stats

1. Select the Category tab.
   The Category screen displays.

   

   
2. Refer to the Top Categories graph to assess the most prolific, and allowed, application data categories utilized by RF Domain member devices.

   Total Bytes	Displays the top ten RF Domain member application categories in respect to total data bytes passing through the RF Domain member WiNG managed network. These are only the administrator allowed application categories approved for proliferation within the RF Domain.
   Bytes Uploaded	Displays the top ten RF Domain member application categories in respect to total data bytes uploaded through the RF Domain member WiNG managed network. If this category data is not aligned with application utilization expectations, consider allowing or denying additional categories or adjusting their precedence (priority).
   Bytes Downloaded	Displays the top ten RF Domain member application categories in respect to total data bytes downloaded from the RF Domain member WiNG managed network. If this category data is not aligned with application utilization expectations, consider allowing or denying additional categories and categories or adjusting their precedence (priority).

3. Refer to the Category Detailed Stats table to assess specific application category data utilization:

   Category Name	Lists the RF Domain member allowed category whose application data (in bytes) is passing through the WiNG managed network.
   Uploaded	Displays the number of uploaded application category data (in bytes) passing the through the WiNG managed network.
   Downloaded	Displays the number of downloaded application category data (in bytes) passing the through the WiNG managed network.
   Num Flows	Lists the total number of application category data flows passing through RF Domain member devices. A category flow can consist of packets in a specific connection or media stream. Packets with the same source address/port and destination address/port are considered one flow.

4. Click Clear Category Stats to clear the application category assessment data counters and begin a new assessment.
5. Periodically, click Refresh to update the statistics counters to their latest values.