Profile Overrides - Port Channels

The access point‘s profile can be applied to customize the port channel configurations as part of its interface configuration.

Note

WiNG 7.1.X does not provide port-channel configuration on AP5XX model access points. This feature will be supported in future releases.

To review an access point's existing VLAN configurations

1. Go to Configuration → Devices → Device Overrides.

   The Device Overrides screen displays. This screen lists devices within the managed network.

2. Select an access point.

   The selected access point's configuration menu displays.

3. Expand Interface and select Port Channels.

   The existing port channel configurations are displayed.

   

   Profile Overrides - Interface - Port Channels - Main Screen

   
4. Review existing port channel configurations and their status to determine whether a parameter requires an override.

   Name	The port channel's numerical identifier assigned when it was created. The numerical name cannot be modified as part of the edit process.
   Type	Whether the type is port channel.
   Description	A short description (64 characters maximum) describing the port channel or differentiating it from others with similar configurations.
   Admin Status	A green check mark means the listed port channel is active and currently enabled with the profile. A red “X” means the port channel is currently disabled and not available for use. The interface status can be modified with the port channel configuration as required.