Profile Overrides - Basic - IPv4 Configuration (AP Only)

1. Select the Basic Configuration → IPv4 tab.

   The IPv4 configuration screen displays.

   

   Profile Overrides - Interfaces - VLAN - Basic Configuration - IPv4 Screen

   
2. Set the following network information in the IPv4 Addresses field:

   Enable Zero Configuration	Zero configuration can be a means of providing a primary or secondary IP addresses for the virtual interface. Zero configuration (or zero config) is a wireless connection utility included with Microsoft Windows XP and later as a service dynamically selecting a network to connect based on a user's preferences and various default settings. Zero config can be used instead of a wireless network utility from the manufacturer of a computer's wireless networking device. This value is set to None by default.
   Primary IP Address	Define the IP address for the VLAN associated virtual interface.
   Use DHCP to Obtain IP	Select to allow DHCP to provide the IP address for the virtual interface. Selecting this option disables the Primary IP Address field.
   Use DHCP to Obtain Gateway/DNS Servers	Select to allow DHCP to obtain a default gateway address and DNS resource for one virtual interface. This setting is disabled by default and only available when the Use DHCP to Obtain IP option is selected.
   Secondary Addresses	Use this parameter to define additional IP addresses to associate with VLAN IDs. The address provided in this field is used if the primary IP address is unreachable.

3. Click OK to save the changes to the IPv4 configuration.

   Click Exit to close the screen without saving any updates.