Migrate a 3-Stage Clos to 5-Stage Clos Fabric

You can migrate a 3-stage Clos to 5-stage Clos fabric.

About this task

Complete the following tasks to migrate a 3-stage Clos to 5-stage Clos fabric

Procedure

  1. Create a 3-Stage Clos Fabric
  2. Migrate a 3-Stage Clos to 5-Stage Clos Fabric
  3. Disconnect Border-leafs from Spine and Connect to Super-spine
  4. Addition of Super-spine Devices to the Migrated 5-stage Clos Fabric
  5. Configure Migrated 5-stage Clos Fabric
  6. Traffic Disruption during Fabric Configure
  7. Verification of Fabric Underlay Configuration on the Migrated 5-stage Clos Fabric
  8. Verification of Fabric Physical Underlay and Overlay Topology on the Migrated 5-stage Clos Fabric