Configure Peer Group on Tenant BGP

You can configure a peer group on a tenant BGP.

About this task

Follow this procedure to configure a peer group.

Procedure

  1. To configure BGP peer-group on tenant BGP, run the following command:
    efa tenant service bgp peer-group create --name <peer-group-name> --tenant <tenant-name>
          --description <description>
          --pg-name <border-leaf-ip:pg-name> 
          --pg-asn <border-leaf-ip:pg-name,remote-asn>
          --pg-bfd <border-leaf-ip:pg-name,bfd-enable(true/false),interval,min-rx,multiplier>
          --pg-next-hop-self <border-leaf-ip:pg-name,next-hop-self(true/false/always)>
          --pg-update-source-ip <border-leaf-ip:pg-name,update-source-ip>
          --pg-ipv6-uc-nbr-activate <device-ip,pg-name:true/false>

    The following example creates a BGP peer group on tenant BGP:

    efa tenant service bgp peer-group create –name ten1BgpPG1 --tenant tenant1
        --pg-name BL1-IP:pg1 --pg-asn BL1-IP:pg1,6000                       
        --pg-bfd BL1-IP:pg1,true,100,200,5
        --pg-next-hop-self BL1-IP:pg1,true
        --pg-update-source-ip BL1-IP:pg1,10.20.30.40
        --pg-ipv6-uc-nbr-activate 10.20.246.29,v1:true
  2. To update BGP peer-group, run the following command:
    efa tenant service bgp peer-group update --name <peer-group-name> --tenant <tenant-name>
        --operation <peer-group-add|peer-group-delete|peer-group-desc-update> --description <description>
        --pg-name <border-leaf-ip:pg-name> --pg-asn <border-leaf-ip:pg-name,remote-asn>
        --pg-bfd <border-leaf-ip:pg-name,bfd-enable(true/false),interval,min-rx,multiplier>
        --pg-next-hop-self <border-leaf-ip:pg-name,next-hop-self(true/false/always)>
        --pg-update-source-ip <border-leaf-ip:pg-name,update-source-ip>
        --pg-ipv6-uc-nbr-activate 10.20.246.29,v1:true

    The following example updates a BGP peer group on tenant BGP:

    efa tenant service bgp peer-group update --name ten1BgpPG1 --tenant tenant1
         --operation peer-group-add                       
         --pg-name BL1-IP:pg2 –pg-asn BL1-IP:pg2,7000                       
         --pg-bfd BL1-IP:pg2,true,200,300,6                      
         --pg-next-hop-self BL1-IP:pg2,true 
         --pg-update-source-ip BL1-IP:pg2,10.20.30.41
         --pg-ipv6-uc-nbr-activate 10.20.246.29,v1:true