Edit Fabric Settings

You can edit certain fabric settings after the fabric configuration.

Changes made in the fabric settings are displayed in the efa fabric show command output. The efa fabric show command output marks the changed settings as Updated Fabric Settings and corresponding modification codes are displayed.
efa fabric show output:
...
Updated Fabric Settings: BGP-LL
FABRIC SETTING:
BGPLL - BGP Dynamic Peer Listen Limit, BGP-MD5 - BGP MD5 Password , BFD-RX - Bfd Rx Timer, BFD-TX - Bfd Tx Timer, BFD-MULTIPLIER - Bfd Timer,BFD-ENABLE - Enable Bfd, BGP-MULTIHOP - BGP ebgp multihop, P2PLR - Point-to-Point Link Range, MCTLR - MCT Link Range, LOIP - Loopback IP Range..

Edit Fabric IP Range Settings

Edit Fabric BFD Settings

Fabric Settings in Active Fabric: Small Data Center Fabric

Cannot be Updated Can be Updated Invalid Settings for Small Data Center Fabric

--rack-l3-backup-ip-range

--loopback-port-number

--vtep-loopback-port-number

--rack-asn-block

--rack-border-leaf-asn-block

--anycast-mac-address

--ipv6-anycast-mac-address

--mac-aging-timeout

--mac-aging-conversation-timeout

--mac-move-limit

--duplicate-mac-timer

--duplicate-mac-timer-max-count

--max-paths

--allow-as-in

--mtu

--ip-mtu

--rack-underlay-ebgp-peer-group

--rack-overlay-ebgp-peer-group

--lacp-timeout

--mct-port-channel

--control-vlan

--control-ve

--vni-auto-map

--backup-routing-enable

--backup-routing-ipv4-range

--backup-routing-ipv6-range

--overlay-gateway-broadcast-local-bias

--loopback-scheme

-- router-id-loopback-ip-range <ip-range>

-- vtep-loopback-ip-range <ip-range>

--p2p-link-range

--loopback-ip-range

--bfd-enable

--bfd-tx

--bfd-rx

--bfd-multiplier

--mctlink-ip-range

--single-rack-deployment

--md5-password-enable

--md5-password

--bgp-dynamic-peer-listen-limit

--bgp-multihop

--rack-mct-scheme

--rack-mct-ports

--rack-ld-mct-ports

--spine-asn-block

--super-spine-asn-block

--leaf-asn-block

--border-leaf-asn-block

--configure-overlay-gateway

--leaf-peer-group

--spine-peer-group

--super-spine-peer-group

--optimized-replication-enable

--mdtgroup-range

--default-mdtgroup

Fabric Settings in Active Fabric: Clos Fabric

Cannot be Updated Can be Updated Invalid Settings for Clos Fabric

--loopback-port-number

--vtep-loopback-port-number

--spine-asn-block

--super-spine-asn-block

--leaf-asn-block

--border-leaf-asn-block

--anycast-mac-address

--ipv6-anycast-mac-address

--mac-aging-timeout

--mac-aging-conversation-timeout

--mac-move-limit

--duplicate-mac-timer

--duplicate-mac-timer-max-count

--configure-overlay-gateway

--max-paths

--allow-as-in

--mtu

--ip-mtu

--leaf-peer-group

--spine-peer-group

--super-spine-peer-group

--lacp-timeout

--mct-port-channel

--control-vlan

--control-ve

--vni-auto-map

--optimized-replication-enable

--backup-routing-enable

--backup-routing-ipv4-range

--backup-routing-ipv6-range

--mdtgroup-range

--default-mdtgroup

--overlay-gateway-broadcast-local-bias

--loopback-scheme

-- router-id-loopback-ip-range <ip-range>

-- vtep-loopback-ip-range <ip-range>

--p2p-link-range

--loopback-ip-range

--bfd-enable

--bfd-tx

--bfd-rx

--bfd-multiplier

--mctlink-ip-range

--md5-password-enable

--md5-password

--bgp-dynamic-peer-listen-limit

--rack-l3-backup-ip-range

--rack-asn-block

--rack-border-leaf-asn-block

--single-rack-deployment

--rack-underlay-ebgp-peer-group

--rack-overlay-ebgp-peer-group

--bgp-multihop

--rack-mct-scheme

--rack-mct-ports

--rack-ld-mct-ports