An egress group is a set of egresses
(9920)
or a set of interfaces or port-channels (SLX/MLX).
About this task
When you create an egress group, you
assign a name and associate at least one egress (9920) or port/port channel
(SLX/MLX). An egress associates an egress port (or port channel) with an egress policy
for 9920.
Procedure
-
In the Navigation menu, select
Device
Inventory.
-
In the Devices page, click anywhere in the
required device row except the Actions column (
)
to proceed to the device Overview page.
-
In the Device Config menu,
select .
-
To create an egress group for
SLX and MLX devices, take the following steps.
-
In the nHop Type
field, select the next hop domain type: TVF
(transparent VLAN flooding) or VLAN (MLX
only).
-
In the nHop
Value field, provide the VLAN ID (MLX only) or TVF
ID.
The valid value ranges
for VLAN and TVF are as follows:
- MLX: VLAN is
1-4090 and TVF is 1-2016
- SLX: TVF is
1-4095
-
Select the required
Ports/PortChannels.
-
Select Create.
-
To create an egress group for
9920 devices, take the following steps.
-
In the Name
field, enter a name for the group.
An egress group cannot
have the same name as an egress.
-
In the Egress
List field, select at least one egress to associate with
the group.
- Optional:
Select Create
Egress to create an egress to associate with the egress
group, if required.
-
Select Create.
