Create an Egress for Devices

Egress is a combination of ports, port channels, precedence, and an associated egress policy.

About this task

Note

For MLX and SLX devices, the egresses are created internally when the egress group is created, and the egress group lists the ports or port-channels along with TVF or VLAN.

1. In the Navigation menu, select Device Inventory.
2. In the Devices page, click anywhere in the required device row except the Actions column () to proceed to the device Overview page.
3. In the Device Config menu, select Policies and Configuration > Egresses > Add Egress.
4. In the Name field, enter a name.
   The egress cannot have the same name as an egress group.
5. In the Port/Port Channel field, select an egress port or port channel.
6. In the Precedence field, select the order of precedence for the port or port channel.
   The precedence indicates the priority given to the port or port channel. The lower the number, the higher the priority.
7. Select Add Port/Precedence (+) to add your selections.
8. (9920 only) In the Egress Policy field, select the policy to associate with the egress.
9. Select Save.