Create a 5 Stage Fabric

Procedure

  1. In the Navigation menu, select Fabrics.
  2. In the Fabrics page, select Create Fabric.
  3. In the Fabric Name field, enter a name for the fabric.
  4. Optional: In the Fabric Description field, enter the description for the fabric.
  5. Select the 5 Stage Clos topology.
    Select new fabric type
  6. Select Next.
  7. In the Fabric Properties page, complete the fields as required or select the Auto Config Mode check box to use the default fabric settings.
    5 stage clos fabric properties
  8. Select Create Fabric.
  9. In the Build 5 Stage Clos Fabric Pods page, select + or - to add new 3 stage or border leaf pods.
    select pods page
    • Alternatively, you can select Add New Pod.
    • One pod of each type is available in the UI by default and the pod names are auto-generated. For example: SuperSpinePod1, Stage3Pod1, and BorderLeafPod1.
  10. Select Select Devices to add new devices.
  11. Select the check boxes of the required devices from the following tabs:
    • SuperSpinePod1
    • Stage3Pod1
    • BorderLeafPod1
    Select devices for pods
  12. Select Accept Super Spine Pods, Accept Spines, or Accept Border Leaf Pods as applicable.
  13. Select Accept All the Pods to add all devices to the topology.
    5 stage clos topology validation
    • The discovered topology is displayed. You can select and edit the device configuration directly from the Physical Topology or View Devices panel as required.
    • You can select devices in the rack to access and update device specific configurations such as ASN, VTEP Loopback ID, and Loopback ID. The attributes in the Device Information window vary by device role.
    • In the Device Information window, select Device Actions > Network Essentials to modify network essential configurations of the required device ports. For more information, see Network Essentials.
    Device Actions Menu

    Select Topology View (Topology view icon) and List view (List view icon) to switch the view between topology and list.

  14. To enlarge the topology to the width of the interface, select Expand (Expand icon).
  15. To zoom in and out on the topology screen, use the Zoom (Zoom icons) icons.
  16. To scroll through the topology screen, use the Scroll (Scroll icon) icon.
  17. Select Finish to configure the topology.
    The 5 stage Clos fabric topology is configured.

What to do next

Select View Fabric or Proceed to Dashboard to return to the Fabrics page.