Routing Configuration

The device must have an IPv4 interface configured. For more information, see Interface Configuration.

Use this task to configure IP4 Static Routes for the selected device.

Go to Manage > Devices.
Select the host name of the switch in the Devices list, and then select the Configure tab in the Device Details panel.
Under the Network Allocation menu, select Routing Configuration.

Select

Add

to add or

Edit

to edit, and then configure the following settings:

Table 1. Static Route Settings
Field	Description
Static Route Name	The name of the Static Route.
Destination Subnet	The desired subnet, such as `10.1.0.0/16`.
Next Hop IP	The desired IP Address for the next Hop, such as `123.321.132.312`.
Next Hop IP Ping Protection	Enable or Disable Next Hop IP Ping Protection. Note: Enabling Ping Protection will generate a Ping Protection Status tool tip when viewing your device within Manage > Devices > Monitoring > Routing.
Metric	The desired metric value.
Routing Instance	Shows the Routing Instance.

Select Save.
To delete a static route, select the check box next to the Static Route Name and then select .
To update the device immediately, select Update.
Select the type of update, and then select Save as Defaults to save this option as the default action.
To update the device immediately, select Perform Update.

9039462-00 Rev AA