The following figure depicts the front panel of the C5110. C5110 Front Panel Features depicts the features and functions of the C5110 front panel.
Callout | Feature | Function |
---|---|---|
1 | Power-on indicator | The power button controls the DC power supply output to the system. |
2 | NMI button | Not used in the current release. |
3 | System Identification button | The identification buttons on the front and back panels can be used to locate a particular system within a rack. When one of the buttons is pushed, the blue system status indicator on the front and back blinks until one of the buttons is pushed again. |
4 | LCD display | Provides system ID, status information and system error
messages. The LCD display lights during normal system operation. Both the
systems management software and the identification buttons located on the front
and back of the system can cause the LCD to flash blue to identify a particular
system. The LCD display lights amber when the system needs attention due to a
problem with power supplies, fans, system temperature or hard drives. Note: : If the system is connected to AC power and an error
has been detected, the LCD display amber lights regardless of whether the
system has been powered on.
|
5 | USB connectors | Connects USB 2.0-compliant devices to the system. For more information, see the Note below. |
6 | Video connector | Not used in the current release. |
7 | Hard drive | One 3.5 inch SATA 250 GB drives. |
8 | Optical drive | Not used in the current release. |
Note
The C5110 is equipped with four USB connectors — two on each front and back panel. However, the controller is capable of supporting only one USB device at a time, regardless of what USB connector the device is connected to. If you connect a second USB device while the first is already connected, the system will return an error.