A |
System ID Button w/Integrated LED |
The identification buttons on the front panel can be used to locate a particular system within a rack. When one of the buttons is pushed, the blue system status indicator on the front and back blinks until one of the buttons is pushed again. |
B |
NMI Button |
Not used |
C |
Mgmt Port Activity LED |
For more information, see RJ45 Port LEDs (Management Port, Data Port 1, Data Port 2). |
D |
Data Port 2 Activity LED |
For more information, see RJ45 Port LEDs (Management Port, Data Port 1, Data Port 2). |
E |
System Cold Reset Button |
|
F |
System Status LED |
The blue-colored system status indicator blinks to indicate the location of a particular system within a rack. The indicator continues to blink until one of the system identification button is pushed again. |
G |
Power Button w/Integrated LED |
The power button controls the DC power supply output to the system. |
H |
Hard Drive Activity LED |
LED Off - Power on and drive spinning up or spinning down/No access or no faults |
Blinking Green - Power on with drive activity |
Solid Amber - Hard drive fault has occurred |
I |
Data Port 4 Activity LED |
Not used |
J |
Data Port 1 Activity LED |
For more information, see the following table. |