About This Guide
Backing Up and Restoring the Image
Backing Up and Restoring the Configuration
Upgrading the Wireless Convergence Software
Working with External Storage Devices
Using the Console Port
- Using the Console Port in the Wireless Controller Models C25, C35, C4110, C5110, and C5210
  - Entering Rescue Mode on the Wireless Controller C25, C4110, and C5110
  - Entering Rescue Mode on the Wireless Controller C35, and C5210
- Using the Console Port for the V2110
Performing System Maintenance
Using Controller Utilities
- Using Controller Utilities
  - Capturing Exception Traffic
- Enabling SNMP
  - MIB Support
    - NetSight Suite Integration
  - Enabling SNMPv1/v2c on the Wireless Controller
Recovering the Wireless Controller
- Rescue Mode Authentication Service Management Menu
- Recovering the Wireless Controller from File System Corruption
Maintaining the Wireless Controller
Maintaining the Wireless AP Software
Performing Wireless AP Diagnostics
- Performing Wireless AP Diagnostics Using SSH
  - Enabling SSH on a Selected Wireless AP
  - Disabling SSH Access on a Selected AP
Glossary
- A
- B
- C
- D
- E
- F
- G
- H
- I
- J
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- X

Backing Up the Current Image During the Upgrade Process from the Wireless Assistant GUI

You must follow the procedures detailed in this section if you want to backup the current image via the Wireless Assistant GUI while upgrading the image. For more information on how to upgrade the image, see Upgrading Using the GUI.

Note

When you backup the current image, the license activation key and option keys are also backed up.

Published December 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback