Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear port broadcast

Use this command to reset the broadcast threshold and/or clear the peak rate and peak time values on one or more ports.

Syntax

clear port broadcast port-string {[threshold] [peak]}

Parameters

port-string Specifies the port(s) on which broadcast settings will be cleared.
threshold (Optional) Clears the broadcast threshold setting.
peak (Optional) Clears the broadcast peak rate and peak rate time values.

Defaults

None.

Mode

All command modes.

Examples

This example shows how to clear all broadcast suppression settings on ports ge.1.1 through 5:

System(rw)->clear port broadcast ge.1.1-5 threshold peak

This example shows how to clear threshold broadcast suppression settings on ports ge.1.1 through 5:

System(rw)->clear port broadcast ge.1.1-5 threshold

Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page