Use this command to enable or disable transmit queue monitoring global traps generation.
| enable | Enables transmit queue monitoring global traps generation. |
| disable | Disables transmit queue monitoring global traps generation. |
Transmit queue monitoring global traps generation defaults to enabled.
All command modes.
With traps enabled, transmit queue monitoring generates a trap each time an action threshold is met. The trap will indicate the exceeded threshold and the interface index.
This example shows how to set the transmit queue monitoring trap generation state to disabled:
System(rw)->set txqmonitor trapstatus disable System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB