Use this command to enable or disable sending an LLDP-MED notification when a change in the topology has been sensed on the port (that is, a remote endpoint device has been attached or removed from the port).
| enable | Enable transmitting LLDP-MED traps on the specified ports. |
| disable | Disable transmitting LLDP-MED traps on the specified ports. |
| port-string | Specifies the port or range of ports to be affected. |
None.
All command modes.
This example enables transmitting LLDP-MED traps on ports ge.1.1 through ge.1.6.
System(rw)->set lldp port med-trap enable ge.1.1-6
Print
this page
Email this topic
Feedback
View PDF
Download EPUB