show radius-snooping

Example

This example shows how to display RADIUS configuration information:

System(rw)->show radius-snooping
RADIUS Snooping:                        enabled
RADIUS Snooping Accounting:             enabled
Timeout:                                20
Number of Configured Flows:             12
Active Sessions:                        0
Enabled ports:
ge.1.5
Enabled ports: ge.1.1-ge.1.8; ge.1.22

Radius-Snooping Settings

Output...	What it displays...
RADIUS Snooping	Specifies whether RS is globally enabled or disabled.
RADIUS Snooping Accounting	Specifies whether RS accounting is enabled or disabled.
Timeout	Specifies the number of seconds that the firmware waits for a RADIUS response frame to be returned from the RADIUS server, after successfully snooping a RADIUS request frame from the client.
Number of configured flows	Specifies the number of globally configured flows for this system.
Active sessions	Specifies the number of active sessions for this system.
Enabled ports	Specifies the ports RS is currently enabled on.