Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set port ingress-filter

Use this command to limit the forwarding of received frames based on port VLAN egress lists.

Syntax

set port ingress-filter port-string {enable | disable}

Parameters

port-string Specifies the port(s) to enable or disable for limiting the forwarding of received frames based on port.
enable | disable Enable or disable ingress filtering. Default value: disable.

Defaults

None.

Mode

All command modes.

Example

This example shows how to enable ingress-filter on ports ge.1.1-4:

System(rw)->set port ingress-filter ge.1.1-4 enable
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page