Removing an E4G-200 Router from an Equipment Rack

1. De-energize the DC circuit for all power connections.
2. Loosen the retaining screws and unplug each DC power connector from the DC power socket on the router.
3. Disconnect the ground wire:
   1. Loosen the retaining screw on the ground lug.
   2. Pull the ground wire out of the lug and move the ground wire out of the way.
4. Loosen and remove the four screws holding the router in place in the equipment rack.
5. Carefully remove the router from the rack and place it on a secure, flat surface.