Connecting the Ground Cable

You must ground the DC power supply before connecting it to a power source.

Warning

Connect the ground cable before you connect any power cables.

Warning

Disconnect the ground cable after you disconnect all power cables.

1. Verify that the DC circuit is de-energized.
2. Identify the grounding point on the front panel of the power supply.
3. Insert an M3.5 screw (provided) through the ring terminal on the ground cable and into the grounding point on the power supply.
   See the following figures.

   

   Connecting the Ground Cable (Model 10933)

   

   1 = Grounding point

   2 = Ground cable

   

   Connecting the Ground Cable (Model 10934A)

   

   1 = Grounding point

   2 = Ground cable

4. Tighten the screw to 12.6 pound-inches (1.42 Newton-meters).
5. Connect the other end of the cable to a known reliable earth ground point at your site.