Power Cord Requirements for AC Power Supplies

Power cords used on AC-powered E4G series routers must meet specific requirements.

• The power cord must be agency-certified for the country of use.
• The power cord must have an IEC320-C13 connector for connection to the router.
• The power cord must have an appropriately rated and approved wall plug applicable to the country of installation.
• For cords up to 6 feet (2 m) long, the wire size must be 18 AWG (.75 mm²) minimum; over 6 feet, the minimum wire size is 16 AWG (1.0 mm²).