Physical Dimensions
| E4G-200 router | Height: 1.75 inches (4.4 cm)
Width: 17.25 inches (43.8 cm) Depth: 10.75 inches (27.3 cm) (Includes connectors and ground lug) |
| Clock/timing module | Height: 1.75 inches (4.4 cm)
Width: 2.5 inches (6.4 cm) Depth: 8 inches (20.32 cm) (includes connectors) |
| T1/E1 module | Height: 1.75 inches (4.4 cm)
Width: 6.25 inches (15.9 cm) Depth: 9.5 inches (24.1 cm) (includes connectors) |
Weight
| E4G-200 router | 7.14 lb (5.46 kg) |
| Clock/timing module | 0.75 lb (0.34 kg) |
| T1/E1 module | 2.0 lb (0.9 kg) |
Packaged Dimensions
| E4G-200 router | Height: 5.25 inches (13.3 cm)
Width: 22.5 inches (57.2 cm) Depth: 14 inches (35.6 cm) |
| E4G-200 CLK Clock/timing module |
Height: 3.0 inches (7.62 cm)
Width: 8.5 inches (21.6 cm) Depth: 6.0 inches (15.2 cm) |
| T1/E1 module | Height: 4.5 inches (11.4 cm)
Width: 7.25 inches (18.4 cm) Depth: 14.0 inches (35.6 cm) |
Packaged Weight
| E4G-200 router | 9.0 lb (4.1 kg) |
| E4G-200 CLK
Clock/timing module |
0.75 lb (0.34 kg) |
| T1/E1 module | 2.75 lb (1.25 kg) |
Average Latency: Model E4G-200-12x
| Frame Size (Bytes) | Average Latency (ms) |
|---|---|
| 64 | 3.324 |
| 128 | 3.339 |
| 256 | 3.270 |
| 512 | 3.323 |
| 1024 | 3.323 |
| 1280 | 3.329 |
| 1518 | 3.334 |
| 2176 | 3.315 |
| 4096 | 3.311 |
| 6144 | 3.315 |
| 9216 | 3.312 |
Fan Behavior: Model E4G-200-12x
| Normal condition | < 40°C | 40°C to 50°C | > 50°C |
| Fan no. 1 (AVC) | ON (6,500 RPM +/- 20%) | ON (10,500 RPM +/- 20%) | ON (10,500 RPM +/- 20%) |
| Fan no. 2 (Sunon) | OFF | OFF | ON (18,500 RPM +/- 20%) |
| Abnormal condition | < 50°C | > 50°C | |
| Fan no. 1 abnormal | N/A | N/A | |
| Fan no. 2 (Sunon) | ON (12,500 RPM +/- 20%) | ON (18,500 RPM +/- 20%) | |
Power: Model E4G-200
| Operational Voltage Ranges | –22 to 60 V
|
| Nominal Input Ratings | –48 V, 1.25 A or +24 V, 2.5 A |
| Nominal Input Current | 0.95 A @ –48 V
2.2 A @ +24 V |
| Inrush Current | 35 A at 72 V peak |
| DC Voltage Input Range | –22 to 60 V
|
| DC Power Supply Input Socket | 3-pin terminal block: refer to Preparing the DC Power Input Cable |
| Minimum wire size | 14 AWG (1.5 mm2) copper stranded |
Power: Model E4G-200-12x
| Operational Voltage Ranges | 18 to 75 V
|
| Nominal Input Ratings | –48 V, 1.25 A or +24 V,
2.5 A
|
| Nominal Input Current | 1.02 A @ –48 V
2.02 A @ +24 V |
| Inrush Current | 2.7 A at 48 V |
| DC Voltage Input Range | 18 to 75 V
|
| DC Power Supply Input Socket | 3-pin terminal block: refer to Preparing the DC Power Input Cable |
| Minimum wire size | 14 AWG (1.5 mm2) copper stranded |
Power: Model E4G-200 with no Installed Optional Modules
| Input current | 0.68 A @ +24 V
0.52 A @ –48 V |
| Heat dissipation | 33 W, 113 BTU/hr |
| Power consumption | 33 W, 113 BTU/hr |
Power: Model E4G-200-12x with no Installed Optional Modules
| Input current | 1.41 A @ +24 V
0.73 A @ –48 V |
| Heat dissipation | 35 W, 120 BTU/hr |
| Power consumption | 35 W, 120 BTU/hr |
Power: Model E4G-200 with Clock Module
| Input current | 0.83 A @ +24 V
0.64 A @ –48 V |
| Heat dissipation | 40 W, 137 BTU/hr |
| Power consumption | 40 W, 137 BTU/hr |
Power: Model E4G-200-12x with Clock Module
| Input current | 1.61 A @ +24 V
0.82 A @ –48 V |
| Heat dissipation | 40 W, 137 BTU/hr |
| Power consumption | 40 W, 137 BTU/hr |
Power: Model E4G-200 with T1/E1 Module
| Input current | 0.89 A @ +24 V
0.69 A @ –48 V |
| Heat dissipation | 43 W, 147 BTU/hr |
| Power consumption | 43 W, 147 BTU/hr |
Power: Model E4G-200-12x with T1/E1 Module
| Input current | 1.81 A @ +24 V
0.93 A @ –48 V |
| Heat dissipation | 44.5 W, 152 BTU/hr |
| Power consumption | 44.5 W, 152 BTU/hr |
Power: Model E4G-200 with Clock Module and T1/E1 Module
| Input current | 1.02 A @ +24 V
0.78 A @ –48 V |
| Heat dissipation | 49 W, 167 BTU/hr |
| Power consumption | 49 W, 167 BTU/hr |
Power: Model E4G-200-12x with Clock Module and T1/E1 Module
| Input current | 2.02 A @ +24 V
1.03 A @ –48 V |
| Heat dissipation | 49.5 W, 169 BTU/hr |
| Power consumption | 49.5 W, 169 BTU/hr |
Safety Standards
| North American Safety | UL 60950-1:2007 2nd Ed.,
Listed Device (US) CSA 22.2 #60950-1-03 2nd Ed. 2006-07 (Canada) Complies with FCC 21 CFR Chapter 1, Subpart J (US Laser Safety) CDRH Letter of Approval (US FDA Approval) |
| European Safety | CB Scheme IEC 60950-1: 2005
2nd Ed.+National Differences IEC/EN 60825-1:2007 (Lasers Safety) IEC/EN 60825-2:2004+A2:2010 (Optic Fiber Systems) |
| International Safety | GS-TUV Mark EN 60950-1:2006 2nd Ed.
AS/NZS 60950-1 (Australia /New Zealand) |
EMI/EMC Standards
| North America EMC | FCC CFR 47 part 15 Class A (USA)
ICES-003 Class A (Canada) |
| European EMC | EN 55022:2010 Class A EN 55024:2010 Class A includes EN 61000-4-2, 3, 4, 5, 6, 11 EN 55011:2009+A1:2010 EN 61000-3-2,8-2006+A2:2009 (Harmonics) EN 61000-3-3 2008 (Flicker) EN 61000-6-4:2007 (Emissions for Industrial, Scientific & Medical) EN 61000-6-2:2005 (Immunity for Industrial, Scientific & Medical) |
| International EMC | CISPR 22: 2010 Ed 5.2, Class A
(International Emissions) CISPR 24:2010 Class A (International Immunity) IEC 61000-4-2:2008/EN 61000-4-2:2009 Electrostatic Discharge, 8kV Contact, 15 kV Air, Criteria A IEC 61000-4-3:2008/EN 61000-4-3:2006+A1:2008 Radiated Immunity 10V/m, Criteria A IEC 61000-4-4:2004 am1 ed.2./EN 61000-4-4:2004/A1:2010 Transient Burst, 1 kV, Criteria A IEC 61000-4-5:2005 /EN 61000-4-5:2006 Surge, 2 kV L-L, 2 kV L-G, Level 3, Criteria A IEC 61000-4-6:2008/EN 61000-4-6:2009 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A IEC-61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Criteria C |
Directives
| 1999/5/EC R&TTE 2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive 2002/96/EC WEEE 2002/95/EC RoHS China RoHS Order No. 39 |
|
| Country-specific (see Conformity Statements) | Canada, ICES-003, (IC) Japan, Class A, (VCCI) Taiwan, CNS 13438(95) Class A, CNS 14336-1(10), (BSMI) Australia/New Zealand, C-Tick (ACMA) South Korea: KN22, KN24 (KCC) Brazil, Res 442, (ANATEL) Mexico, NOM-19 (NRTL) Russia (GOST-R) |
IEEE 802.3 Media Access Standards
| IEEE 802.3ab 1000BASE-T |
Environmental Data
| Environmental Standards | EN/ETSI 300 019-2-1 v2.1.2
(2009-09) - Class 1.2 Storage EN/ETSI 300 019-2-2 v2.2.1 (2011-11) - Class 2.3 Transportation EN/ETSI 300 019-2-3 v2.2.2 (2003-04) - Class 3.1e Operational EN/ETSI 300 753 (2009-07) - Acoustic Noise |
| Operating conditions | Temperature range: –40°C to
+65°C (–40° to 149°F) Humidity: 5% to 95% relative humidity, non-condensing Altitude: 0 to 3,000 meters (9,850 feet) Shock (half sine): 30 m/s2, 60 shocks in each direction Random vibration: 3 to 500 MHz @ 1.5 G rms |
| Storage & transportation conditions (packaged) | Temperature: –40°C to 70°C
(–40°F to 158°F) Humidity: 10% to 95% relative humidity, non-condensing Packaged shock (half sine): 180 m/s2, 100 shocks in each direction Packaged sine vibration: 5 to 62 Hz @ velocity 5 mm/s, 62 to 500 Hz @ 0.2 G Packaged random vibration: 5 to 20 Hz @ 1.0 ASD, 20 to 200 Hz @–3 dB/octave 14 drops minimum on sides & corners @ 42 inches (<15 kg box) |
Sound: Model E4G-200
| Sound pressure | Low fan speed: 28.2 dB(A) per
ISO 7779:2010 High fan speed: 52.9 dB(A) per ISO 7779:2010 |
| Sound power in accordance with EN 300 753 v1.3.1 (2011-11) | Low fan speed: 33.2 dB(A) per
ISO 3744:1994 High fan speed: 57.9 dB(A) per ISO 3744:1994 |
| Declared sound power in accordance with EN 300 753 v1.3.1 (2011-11) | Low fan speed: 3.3 B(A) in
accordance with ISO 9296:1998 High fan speed: 5.7 B(A) in accordance with ISO 9296:1998 |
Sound: Model E4G-200-12x
| Declared sound power in
accordance with ISO 9296:1988 ISO 3744:2010(E) ISO 7779:2010(E) ETSI 300 753:2007(E) |
Low (< 40°C) = 5.2 bels(A)
(LWAd) Medium (40°C to 50°C) = 6.3 bels(A) (LWAd) High (> 50°C) = 7.2 bels(A) (LWAd) |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB