Telecom Approvals

FCC Par68 Notice

This equipment has been tested and complies with:

47 CFR Part 68 of FCC rules.
TIA/EIA/IS-968, Technical Criteria for Terminal Equipment To Prevent Harm to the Telephone Network, July 2001, as adopted by the Administrative Council on Terminal Attachments (ACTA).

The Extreme Networks E4G series routers meet the requirements of the Industry Canada label (CS-03) for telecommunications equipment.

Le présent materiel est conforme aux specifications techniques applicables d‘Industrie Canada.

Observe the following general information and safety precautions:

This equipment meets certain telecommunications network protection, operation, and safety requirements as described in the appropriate terminal equipment requirements document(s). The department does not guarantee the equipment will operate to the user‘s satisfaction.
Before installing the equipment, check that you have permission to connect it to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or any equipment malfunctions, may cause the telecommunications company to request that the user disconnect the equipment.
Ensure that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

The Extreme Networks E4G series routers meet the requirements of the Japan Approvals Institute for Telecommunications Equipment (JATE).