E4G-200 Clock (CLK) Module

An optional clock module for the E4G-200 router provides timing. Timing is based on either:

ITU-T Synchronous Ethernet (SyncE) protocol
Precision Time Protocol based on the IEEE specification 1588v2

The clock module has four mini-BNC connectors providing Sync In/Sync Out timing interfaces and an RJ-45 connector that provides an RS-422 BITS-IN interface. Clock modules can be installed or removed without powering down the router, although a system reboot is required to initialize the module.

E4G-200 Clock Module

1 = LED	3 = BITS IN interface
2 = Sync In/Sync Out interfaces

Published April 28, 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback