Generate an RSA Key

Use this procedure to generate an RSA key for the selected device.

  1. Go to Devices and select a target device.
  2. Select the Certificates tab.
  3. Select the RSA Keys tab.
  4. To create an RSA key, select and configure the parameters as described in Generate RSA Key Parameters.
    Table 1. Generate RSA Key Parameters
    Parameter Description
    Key Name Enter a name (up to 32 characters) for the RSA key.
    Key Size Set the size of the key (in bits) as either 2048 or 4096. For optimum functionality, the recommended setting is 2048.
  5. Select OK to generate the RSA key.
9037761-04 Rev AB