Add profile information for access points (APs), controllers and service
platforms.
-
Select Profiles.
-
Select
.
The Add Profile
dashboard opens.
-
Configure profile parameters as
described in Profile
Parameters.
Table 1. Profile
Parameters
| Parameter |
Description |
| Profile Name |
Enter a unique profile name. The profile name must not
contain any spaces. |
| Select Device Type |
Select a device from the device type drop-down. A list of
all available devices are displayed. |
| Copy From |
Select Copy From, then select an existing profile from
the drop-down list to copy profile configuration
information. Only profile configuration information is
copied. The profile name and device type remains
unique |
-
Select Add.
The General tab opens by default.
Note
You must configure and save
settings in at least one of the tabs to save the profile permanently.
Otherwise, the created profile persists if you move away from Profile
configuration, but only until you log out.
