Edit Site Basic Configuration

After a site is created, you can edit the basic configuration settings. To get started:

  1. Go to Site.
  2. Select a site from the sites list.
    The system displays the Basic Configuration screen.
  3. Basic configuration settings:
    Field Description
    Site Name Name of the site
    Location Physical location of the city where the site is situated
    Contact Site owner contact information
    Time Zone Drop-down to select the timezone for the site
    Country Country where the site is located
    Address Select the address picker icon to select Allow or Don't Allow on your computer's laptop settings to automatically pick the site location. Alternatively, select the address picker and manually search for the site address
    VLAN Specify the VLAN (within a range of 1 - 4,094) used for traffic control within this site (RF Domain).
    Tenant Account

    Enter the ExtremeLocation Tenant‘s account number.

    At the time of registration, ExtremeLocation Tenants, receive an email containing an account number that identifies the Tenant. By configuring this account number in the RF Domain context, any RF Domain AP reports that are pushed to the ExtremeLocation server include the Tenant's account number along with the reporting AP's MAC address. Including the Tenant account number reinforces the Tenant's identity.
    AD WIPS Wired Mitigation Select this option to enable wired lockdown of wireless device connections upon acknowledgment of a threat.
    AD WIPS Wireless Mitigation Select this option to enable wireless lockdown of wireless device connections upon acknowledgment of a threat.
    Enable NSight Sensor Select this option to enable the NSight sensor module.
  4. In the Channel List, configure channels used by RF domain member radios. These dedicated channels should be as segregated as possible from one another to avoid interference. If too many radios are utilizing a single channel, consider off-loading radios to non utilized channels to improve RF domain performance.
  5. Site tree configuration settings:
    Field Description
    Country Select the country from the drop-down list
    City Select the city from the drop-down list
    Region Select the region from the drop-down list
    Campus Select the campus from the drop-down list
  6. After you have completed configuring the settings, choose from the following actions:
    1. Select Revert to restore default settings.
      Note

      Note

      You cannot restore default settings after applying or saving changes.
    2. Select Apply to commit the configured settings.
      Note

      Note

      This does not permanently save the settings you configured. If you perform a Reload (warm reboot), applied settings will be lost.
    3. Select Save to commit and save the configured settings.
      Note

      Note

      If you do not select Apply or Save, the settings that you configured are not saved when you move away from the configuration window.

9037761-04 Rev AB