Back Up and Restore Access Point Configuration

Use this procedure to export (back up) an access point (AP) Startup or Running configuration to a server using FTP, or to import (restore) a Startup configuration. You can also reset the startup and running configurations to restore the AP to its factory default.

Note

By default, the encryption key is not stored in the startup-config file. Use the inline-password-encryption command with the CLI to move the encrypted key to the startup-config file.

Go to Devices and select a target AP.
Select the Config tab.
Under the Startup tab, choose from the following actions:
- Enter the path to the server where you want to store the startup-config file, then select .
- Enter the path to the server from where you want to import the startup-config file, then select
- Select to restore the AP's startup configuration to factory default.
Under the Running tab, choose from the following actions:
- Enter the path to the server where you want to store the running-config file, then select .
- Select to restore the AP's running configuration to factory default.