DoS Events for Firewall Filter provides a summary of each Denial of Service event the firewall can filter.
| DoS Event | Description |
|---|---|
| Ascend | Series of attacks that target known vulnerabilities in various versions of Ascend routers |
| Broadcast/Multicast ICMP | A series of attacks that take advantage of ICMP behavior in response to echo replies. These usually involve spoofing the source address of the target and sending ICMP broadcast or multicast echo requests to the rest of the network and in the process flooding the target machine with replies |
| Chargen | Establishes a Telnet connection to port 19 and attempts to use the character generator service to create a string of characters which is then directed to the DNS service on port 53 to disrupt DNS services |
| Fraggle | Uses a list of broadcast addresses to send spoofed UDP packets to each broadcast address‘ echo port (port 7). Each of those addresses that have port 7 open will respond to the request generating a lot of traffic on the network. For those that do not have port 7 open they will send an unreachable message back to the originator, further clogging the network with more traffic |
| FTP Bounce | Uses a vulnerability in the FTP “PORT” command as a way to scan ports on a target machine by using another machine in the middle |
| Invalid Protocol | Attackers may use vulnerability in the endpoint implementation by sending invalid protocol fields, or may misuse the misinterpretation of endpoint software. This can lead to inadvertent leakage of sensitive network topology information, called hijacking, or a DoS attack |
| IP TTL Zero | Sends spoofed multicast packets onto the network which have a Time To Live (TTL) of 0. This causes packets to loop back to the spoofed originating machine, and can cause the network to overload |
| IP Spoof | A category of DoS attack that sends IP packets with forged source addresses. This can hide the identity of the attacker |
| LAND | Sends spoofed packets containing the SYN flag to the target destination using the target port and IP address as both the source and destination. This will either crash the target system or result in high resource utilization slowing down all other processes |
| Option Route | Enables the IP Option Route denial of service check in the firewall |
| Router Advertisement | In this attack, the attacker uses ICMP to redirect the network router function to some other host. If that host can not provide router services, a DoS of network communications occurs as routing stops. This can also be modified to single out a specific system, so that only that system is subject to attack (because only that system sees the 'false' router). By providing router services from a compromised host, the attacker can also place themselves in a man-in-the-middle situation and take control of any open channel at will. This is often used with TCP packet forgery and spoofing to intercept and change open TELNET sessions |
| Router Solicit | The ICMP Router Solicitation scan is used to actively find
routers on a network. Of course, a hacker could set up a protocol
analyzer to detect routers as they broadcast routing information on
the network. In some instances, however, routers may not send
updates. For example, if the local network does not have other
routers, the router may be configured to not send routing
information packets onto the local network. ICMP offers a method for
router discovery. Clients send ICMP router solicitation multicasts
onto the network, and routers must respond (as defined in RFC
1122). By sending ICMP router solicitation packets (ICMP type 9) on the network and listening for ICMP router discovery replies (ICMP type 10), hackers can build a list of all of the routers that exist on a network segment. Hackers often use this scan to locate routers that do not reply to ICMP echo requests |
| Smurf | Sends ICMP echo requests to a list of broadcast addresses in a row, and then repeats the requests, thus flooding the network |
| Snork | Uses UDP packet broadcasts to consume network and system resources |
| TCP Bad Sequence | Enables a TCP Bad Sequence denial of service check in the firewall |
| TCP FIN Scan | Hackers use the TCP FIN scan to identify listening TCP port numbers based on how the target device reacts to a transaction close request for a TCP port (even though no connection may exist before these close requests are made). This type of scan can get through basic firewalls and boundary routers that filter on incoming TCP packets with the Finish (FIN) and ACK flag combination. The TCP packets used in this scan include only the TCP FIN flag setting. If the target device's TCP port is closed, the target device sends a TCP RST packet in reply. If the target device's TCP port is open, the target device discards the FIN and sends no reply |
| TCP Intercept | A SYN-flooding attack occurs when a hacker floods a server with a
barrage of requests for connection. Because these messages have
unreachable return addresses, the connections cannot be established.
The resulting volume of unresolved open connections eventually
overwhelms the server and can cause it to deny service to valid
requests, thereby preventing legitimate users from connecting to a
Web site, accessing email, using FTP service, and so on. The TCP intercept feature helps prevent SYN-flooding attacks by intercepting and validating TCP connection requests. In intercept mode, the TCP intercept software intercepts TCP synchronization (SYN) packets from clients to servers that match an extended access list. The software establishes a connection with the client on behalf of the destination server, and if successful, establishes the connection with the server on behalf of the client and knits the two half-connections together transparently. Thus, connection attempts from unreachable hosts will never reach the server. The software continues to intercept and forward packets throughout the duration of the connection. The number of SYNs per second and the number of concurrent connections proxied depends on the platform, memory, processor, and other factors. In the case of illegitimate requests, the software‘s aggressive timeouts on half-open connections and its thresholds on TCP connection requests protect destination servers while still allowing valid requests. When establishing a security policy using TCP intercept, you can choose to intercept all requests or only those coming from specific networks or destined for specific servers. You can also configure the connection rate and threshold of outstanding connections. Optionally operate TCP intercept in watch mode, as opposed to intercept mode. In watch mode, the software passively watches the connection requests flowing through the router. If a connection fails to get established in a configurable interval, the software intervenes and terminates the connection attempt. |
| TCP Null Scan | Hackers use the TCP NULL scan to identify listening TCP ports. This scan also uses a series of strangely configured TCP packets, which contain a sequence number of 0 and no flags. This type of scan can get through some firewalls and boundary routers that filter incoming TCP packets with standard flag settings. If the target device's TCP port is closed, the target device sends a TCP RST packet in reply. If the target device's TCP port is open, the target discards the TCP NULL scan, sending no reply |
| TCP Post SYN | A remote attacker may be attempting to avoid detection by sending a SYN frame with a different sequence number than the original SYN. This can cause an Intrusion Detection System (IDS) to become unsynchronized with the data in a connection. Subsequent frames sent during the connection are ignored by the IDS |
| TCP Packet Sequence Past Window | An attempt to predict the sequence number used to identify packets in a TCP connection, which can be used to counterfeit packets. The attacker hopes to correctly guess the sequence number used by the sending host. If successful, they can send counterfeit packets to the receiving host which will seem to originate from the sending host, even though the counterfeit packets may originate from some third host controlled by the attacker |
| TCP XMAS Scan | The TCP XMAS Scan floods the target system with TCP packets including the FIN, URG, and PUSH flags. This is used to determine details about the target system and can crash a system |
| TCP Header Fragment | Enables the TCP Header Fragment denial of service check in the firewall |
| Twinge | Sends ICMP packets and cycles through using all ICMP types and codes. This can crash some Windows systems |
| UDP Short Header | Enables the UDP Short Header denial of service check in the firewall |
| WINNUKE | Sends a large amount of data to UDP port 137 to crash the NETBIOS service on windows and can also result on high CPU utilization on the target machine |