Configuration Overview
You configure Link Layer Discovery Protocol per port, and each port
can store received information for a maximum of four neighbors.
![Note](./images/Note_Note.png)
Note
LLDP runs with link aggregation.
You can configure LLDP per port.
-
Enable LLDP on the desired port(s) as described in Enabling and Disabling LLDP.
-
If you want to change any default timer values, see Configuring LLDP Timers.
-
Enable the SNMP traps and configure the notification
interval as described in Configuring SNMP for LLDP.
-
Configure any optional TLV advertisements as described in
Configuring Optional TLV Advertisements.
![Note](./images/Note_Note.png)
Note
By default, an LLDP-enabled port advertises the
optional system description TLV. By default, all other optional TLVs are not
advertised.