Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

Configuring an EMS Event Trigger

When you configure an event trigger, you identify an EMS filter that defines the event and a profile that runs when the event occurs. To configure an EMS event-triggered profile, use the following procedure:

  1. Create a log target to receive the event notification by using the following command:

    create log target upm {upm_profile_name}

  2. Configure the log target to specify a filter and any additional parameters that define the event by using the following commands:

    configure log target upm {upm_profile_name} filter filter-name {severity [[severity] {only}]}

    configure log target upm {upm_profile_name} match {any | regex}

Published March 2020prev | next

Email this topicEmail this topic

Print this pagePrint this page