Chassis ID |
The ExtremeXOS software
advertises the system‘s MAC address in this TLV to uniquely identify
the device.
|
Port ID |
The ExtremeXOS software
advertises the port ID in this TLV to uniquely identify the port
that sends the TLVs. This port ID is the ifName object in the
MIB. |
Time to live (TTL) |
This TLV indicates how long
the record should be maintained in the LLDP database. The default
value is 120 seconds (or 2 minutes). When a port is shutting down or
LLDP is disabled on a port, this TLV is set to value 0, which
indicates that the record for this port should be deleted from the
database on other devices. Although you cannot
directly configure the TTL TLV, you can configure the transmit
hold value, which is used to calculate the TTL TLV. (See Configuring LLDP Timers
for more information.)
|
End-of-LLDP PDU |
The end-of-LLDPDU (LLDP
protocol data unit) TLV marks the end of the data in each LLDP
packet. |