PTP Transparent clock

A PTP Transparent clock updates the residence time of the PTP event packets that transit the switch. The switch supports End-to-End delay mechanism and accounts for the residence time for Sync and DelayReq packets in the switch.

To create or delete an End-to-End Transparent clock, use the following command:

create network-clock ptp end-to-end-transparent
delete network-clock ptp end-to-end-transparent

To add PTP capable front-panel ports for End-to-End Transparent clock, use the following command:
```
configure network-clock ptp end-to-end-transparent [add | delete] ports port_list {one-step}
```
To display the End-to-End Transparent clock configuration, use the following command:
```
show network-clock ptp end-to-end-transparent ports port_list {detail}
```

To enable/disable the End-to-End Transparent clock configuration on the front-panel ports, use the following commands:

enable network-clock ptp end-to-end-transparent ports port_list
disable network-clock ptp end-to-end-transparent ports port_list

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback