The profile is configured as follows:
create upm profile macMove ;# editor enable cli scripting create access-list dacl1 "source-address 192.168.10.0/24 " "permit ;count dacl1" create access-list dacl2 "source-address 192.168.11.0/24 " "permit ;count dacl2" create access-list dacl3 "source-address 192.168.15.0/24 " "deny ;count dacl3" create access-list dacl4 "source-address 192.168.16.0/24 " "deny ;count dacl4" create access-list dacl5 "source-address 192.168.17.0/24 " "deny ;count dacl5" configure access-list add dacl1 first ports $(EVENT.LOG_PARAM_3) configure access-list add dacl2 first ports $(EVENT.LOG_PARAM_3) configure access-list add dacl3 first ports $(EVENT.LOG_PARAM_3) configure access-list add dacl4 first ports $(EVENT.LOG_PARAM_3) configure access-list add dacl5 first ports $(EVENT.LOG_PARAM_3) conf access-list ingress_limit vlan v1 conf access-list ingress_limit ports $(EVENT.LOG_PARAM_3) conf access-list egress_limit any ;# enter . for SAVE/EXIT log target configuration create log target upm "macMove" configure log target upm "macMove" filter "macMoveFilter" enable log target upm "macMove"
Print
this page
Email this topic
Feedback
View PDF
Download EPUB