Use the following commands to configure a CFM segment.
Some of these commands are optional and, if not configured, the default values are used. The following table lists the default values for delay measurement for a CFM segment.
Default Values for Delay Measurement for a CFM Segment
| Configuration | Default Values |
|---|---|
|
Transmit interval |
10 seconds |
|
Window |
60 frames |
|
Timeout |
50 milliseconds |
|
Alarm threshold |
10% |
|
Clear threshold |
95% |
|
Dot1p priority |
6 |
Default Values for Loss Measurement for a CFM Segment
| Configuration | Default Values |
|---|---|
|
LMM Transmit interval |
90 seconds |
|
Dot1p priority |
6 |
|
Window |
1200 frames |
|
SES threshold |
0.01 |
|
Consecutive available count |
4 |
Note
The statistics for a particular transmission are preserved until the user triggers the transmission once again or if clear counters cfm segment is triggered from the CLI.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB