To configure a scheduled measurement session, a test profile must be attached to the MEP-RMEP pair.
-
Enter the global configuration mode.
device# configure terminal
-
Use the
protocol cfm
command to enter the CFM protocol configuration mode.
device(config)# protocol cfm
-
Use the
domain-name
command to configure a maintenance domain.
device(config-cfm)# domain-name md1 id 1 level 4
-
Use the
ma-name command to configure the maintenance association (MA).
device(config-cfm-md-md1)# ma-name ma1 id 1 vlan-id 30 priority 3
-
Use the
mep command to configure the maintenance end point (MEP).
device(config-cfm-md-ma-ma1)# mep 1 down Ethernet 1/2
-
Use the
remote-mep command to configure a scheduled measurement session.
device(config-cfm-md-ma-mep-1)# remote-mep 2 test-profile 2dm_default_profile mode initiator
