The egress ACL rate limit feature
supports statistics when the COUNTER-PROFILE-5 counter profile is enabled. The MPLS tunnel statistic also
uses this counter profile.
About this task
Important
- This procedure requires a
system reload to activate the profile configuration. Perform this procedure
during a maintenance window so that the new counter can be activated without
interrupting normal network services.
- The egress ACL rate limiting feature is not
supported on SLX 9150.
Procedure
-
In privileged EXEC mode, access
global configuration mode.
device# configure terminal
-
Access hardware configuration
mode.
-
Configure the counter
profile.
device(config-hardware)# profile counters counter-profile-5
The following message is
displayed.
Warning: To activate the new profile config, please run
'copy running-config startup-config' followed by 'reload system‘.
You
run these commands in steps 5 and 6.
-
Access privileged EXEC
mode.
device(config-hardware)# exit
-
Save the running configuration
to the startup configuration file.
device# copy running-config startup-config
-
Activate the profile
configuration.
-
After the system reloads, verify
the configuration.
device# show hardware profile counters counter-profile-5
switch type: BR-SLX9540-4
current COUNTERS profile: COUNTERS-PROFILE-5
InLIF - HitCount: 16384
InL4 - FwdDrop: 8192
OutLIF - HitCount: 16384
Egress ACL - VOQ Counters: 8192
_________________________________________________________________
Example
This
example summarizes the steps in the
procedure.
device# configure terminal
device(config)# hardware
device(config-hardware)# profile counters counter-profile-5
device(config-hardware)# exit
device# copy running-config startup-config
device# reload system
device# show hardware profile counters counter-profile-5
