Configuring strict priority egress scheduling

Enter global configuration mode.
```
device# configure terminal
```
Select the policy map.
```
device(config)# policy-map policy_1
```

Select the classification.

device(config-policymap)# class default

Specify the scheduling attributes.

device(config-policymap-class)# scheduler strict-priority 3 dwrr 10 10 10 10 60 TC535000 TC6 36000 TC7 37000

Return to privileged EXEC mode.
```
device(config-policymap-class)# end
```

Verify the configuration.

device# show running-config | include strict-priority
  scheduler strict-priority 3 dwrr 10 10 10 10 60 TC5 40000 TC6 41000 TC7 42000

Enter global configuration mode.
```
device# configure terminal
```
Enter interface configuration mode.
```
device(config)# interface ethernet 0/1
```

Bind the policy to the port.

device(conf-if-e-0/1)# service-policy out policy_1

Return to privileged EXEC mode.
```
device(conf-if-e-0/1)# end
```
Save the running-config file to the startup-config file.
```
device# copy running-config startup-config
```

Strict priority scheduling configuration example

device# configure terminal
device(config)# policy-map policy_1
device(config-policymap)# class default
device(config-policymap-class)# scheduler strict-priority 3 dwrr 10 10 10 10 60 TC535000 TC6 36000 TC7 37000  
device(config-policymap-class)# end
device# show running-config | include strict-priority
device(config)# interface ethernet 0/1
device(conf-if-e-0/1)# service-policy out policy_1
device(conf-if-e-0/1)# end
device# copy running-config startup-config