Unset Threshold Monitor Settings

You can unset threshold monitor settings.

About this task

Use this procedure to unset threshold monitor settings.

Procedure

Run the following command:
efa inventory device threshold-monitor unset [ --ip device-ip --fabric fabric-name --type { cpu | memory | bfd-session | lif | mac-table | vxlan-tunnel }]

Parameters

--ip device-ips
Specifies a comma-separated range of device IP addresses. For example:
10.1.1.13,10.1.1.50,10.1.1.101.
--fabric fabric-name
Specify the name of the fabric.
--type type
Specify the type of threshold being unconfigured. Valid types are cpu, memory, bfd-session, lif, mac-table, and vxlan-tunnel

Example

This example unsets the current inventory threshold-monitor settings for the specified device.

efa inventory device threshold-monitor unset --ip 10.10.10.75-76

This example unsets a single inventory threshold-monitor setting for the specified device.

efa inventory device threshold-monitor unset --ip 10.10.10.75 --type cpu