Configure remove-private-as on BGP Peer Group

To enable external connectivity, configure the remove-private-as attribute when you create or update BGP peer group.

By default, remove-private-as is disabled.

About this task

Follow this procedure to configure remove-private-as.

Procedure

  1. Run the following command to configure a remove-private-as when you create a BGP Peer-Group on a tenant VRF: 
    efa tenant service bgp peer-group create --name <bgp-pg-name> --tenant <tenant-name>
    --pg-name <device-ip:pg-name> --pg-asn <device-ip,pg-name:remote-asn>
    --pg-bfd-enable <device-ip,pg-name:true|false> 
    --pg-remove-private-as <device-ip,pg-name:true|false>
  2. Run the following command to configure a remove-private-as when you update a BGP Peer-Group on a tenant VRF: 
    efa tenant service bgp peer-group update --name <bgp-pg-name> --tenant <tenant-name> 
    --operation peer-group-add 
    --pg-name <device-ip:pg-name> --pg-asn <device-ip,pg-name:remote-asn>
    --pg-bfd-enable <device-ip,pg-name:true|false> 
    --pg-remove-private-as <device-ip,pg-name:true|false>
    Example:
    efa tenant service bgp peer-group create --name ten1bgppg1 --tenant ten1 
    --pg-name 10.20.246.15:pg1 --pg-asn 10.20.246.15,pg1:55001 
    --pg-bfd-enable 10.20.246.15,pg1:true 
    --pg-remove-private-as 10.20.246.15,pg1:true 
    --pg-name 10.20.246.16:pg1 --pg-asn 10.20.246.16,pg1:55001 
    --pg-bfd-enable 10.20.246.16,pg1:true 
    --pg-remove-private-as 10.20.246.16,pg1:true

efa tenant service bgp peer-group update --name ten1bgppg1 --tenant ten1 
    --operation peer-group-add 
    --pg-name 10.20.246.15:pg2 --pg-asn 10.20.246.15,pg2:55002 
    --pg-bfd-enable 10.20.246.15,pg2:true 
    --pg-remove-private-as 10.20.246.15,pg2:true 
    --pg-name 10.20.246.16:pg2 --pg-asn 10.20.246.16,pg2:55002 
    --pg-bfd-enable 10.20.246.16,pg2:true 
    --pg-remove-private-as 10.20.246.16,pg2:true

efa tenant service bgp peer-group show --detail
===============================================
Name             : ten1bgppg1
Tenant           : ten1
State            : bgp-pg-state-created

Peer Group
----------
        Device IP        : 10.20.246.15
        Peer Group       : pg1
        Remote ASN       : 55001
        Next Hop Self    : false
        BFD Enabled      : true
        BFD Interval     :
        BFD Rx           :
        BFD Multiplier   :
        Remove Private AS: true
        Dev State        : provisioned
        App State        : cfg-in-sync

        Device IP        : 10.20.246.15
        Peer Group       : pg2
        Remote ASN       : 55002
        Next Hop Self    : false
        BFD Enabled      : true
        BFD Interval     :
        BFD Rx           :
        BFD Multiplier   :
        Remove Private AS: true
        Dev State        : provisioned
        App State        : cfg-in-sync

        Device IP        : 10.20.246.16
        Peer Group       : pg1
        Remote ASN       : 55001
        Next Hop Self    : false
        BFD Enabled      : true
        BFD Interval     :
        BFD Rx           :
        BFD Multiplier   :
        Remove Private AS: true
        Dev State        : provisioned
        App State        : cfg-in-sync

        Device IP        : 10.20.246.16
        Peer Group       : pg2
        Remote ASN       : 55002
        Next Hop Self    : false
        BFD Enabled      : true
        BFD Interval     :
        BFD Rx           :
        BFD Multiplier   :
        Remove Private AS: false
        Dev State        : provisioned
        App State        : cfg-in-sync
================================================
  3. Verify the switch configuration on the SLX device. 
    Rack1-Device1# show running-config router bgp
router bgp
 local-as 4200000000
 capability as4-enable
 fast-external-fallover
 neighbor pg1 peer-group
 neighbor pg1 remote-as 55001
 neighbor pg1 remove-private-as
 neighbor pg1 bfd
 neighbor pg2 peer-group
 neighbor pg2 remote-as 55002
 neighbor pg2 remove-private-as
 neighbor pg2 bfd
 neighbor 10.20.20.4 remote-as 4200000000
 neighbor 10.20.20.4 next-hop-self
 address-family ipv4 unicast
  network 172.31.254.46/32
  network 172.31.254.123/32
  maximum-paths 8
  graceful-restart
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family ipv6 unicast
 !
 address-family ipv6 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family l2vpn evpn
  graceful-restart
 !
!
    		 
    Rack1-Device2# show running-config router bgp
router bgp
 local-as 4200000000
 capability as4-enable
 fast-external-fallover
 neighbor pg1 peer-group
 neighbor pg1 remote-as 55001
 neighbor pg1 remove-private-as
 neighbor pg1 bfd
 neighbor pg2 peer-group
 neighbor pg2 remote-as 55002
 neighbor pg2 password remove-private-as
 neighbor pg2 bfd
 neighbor 10.20.20.5 remote-as 4200000000
 neighbor 10.20.20.5 next-hop-self
 address-family ipv4 unicast
  network 172.31.254.46/32
  network 172.31.254.176/32
  maximum-paths 8
  graceful-restart
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family ipv6 unicast
 !
 address-family ipv6 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family l2vpn evpn
  graceful-restart
 !
!
    Note

    Note

    For information about commands and supported parameters to configure remove-private-as attribute, see ExtremeCloud Orchestrator Command Reference, 3.2.1 .
9037725-01 RevAA