Configure a Tenant VRF

You can configure a tenant VRF.

About this task

Complete the following tasks to configure a tenant VRF in your XCO fabric:

Procedure

  1. Configure Local ASN on Tenant VRF
  2. Enable Graceful Restart on Tenant VRF
  3. Configure MaxPaths on Tenant VRF
  4. Configure Resilient Hashing on Tenant VRF
  5. Configure Redistribute Attribute on Tenant VRF
  6. Configure Advertise Network and Static Network on Tenant VRF
  7. Configure Aggregate Address on Tenant VRF
  8. Configure EVPN IRB VE Cluster Gateway on a Tenant VRF
  9. Route Distinguisher (RD) Allocation Independent of Route Target (RT)
  10. IPv6 Anycast Gateway Support
  11. Configure Static VRF Route
  12. Configure BFD on Static VRF Route
  13. Configure Backup Routing on Tenant VRF
  14. Distributed and Centralized Routing
  15. BFD Timers for Router BGP BFD and Static Route BFD Sessions
9037725-01 RevAA