Configure Out-of-band for a Tenant BGP Peer or Peer Group

You can create out-of-band (OOB) BGP peer group and BGP static or dynamic peer for the use in XCO. Provide the exact BGP peer group or BGP peer configuration in XCO. The configuration enables XCO to manage the BGP peer group and BGP peer created by OOB.

About this task

Follow this procedure to configure out-of-band BGP peer or peer group for a tenant.

Procedure

  1. On both devices, run the show running-config router bgp command to configure OOB.
  2. Run the following command for XCO consumption of OOB BGP Peer Group:
    (efa:root)root@node-2:~# efa tenant service bgp peer-group create --name ten1bgppg1 --tenant ten1 --pg-name 10.20.246.15:pg1 --pg-asn 10.20.246.15,pg1:65001  --pg-name 10.20.246.16:pg1 --pg-asn 10.20.246.16,pg1:65001
    
    Error :  conflicting peer group: [10.20.246.15,pg1:,65001,false,,] and [10.20.246.15,pg1:,65002,false,,] which is not created by Tenant service
    
    (efa:root)root@node-2:~# efa tenant service bgp peer-group create --name ten1bgppg1 --tenant ten1 --pg-name 10.20.246.15:pg1 --pg-asn 10.20.246.15,pg1:65002  --pg-name 10.20.246.16:pg1 --pg-asn 10.20.246.16,pg1:65001
    
    Error :  conflicting peer group: [10.20.246.16,pg1:,65001,false,,] and [10.20.246.16,pg1:,65002,false,,] which is not created by Tenant service
    
    (efa:root)root@node-2:~# efa tenant service bgp peer-group create --name ten1bgppg1 --tenant ten1 --pg-name 10.20.246.15:pg1 --pg-asn 10.20.246.15,pg1:65002  --pg-name 10.20.246.16:pg1 --pg-asn 10.20.246.16,pg1:65002
    
    BgpService created successfully.
    
    (efa:root)root@node-2:~# efa tenant service bgp peer-group show
    ================================================================================================================
    Name        : ten1bgppg1
    Tenant      : ten1
    State       : bgp-pg-created
    +-------------+------+--------+---------+----------+--------+-------------------------+------------+-----------+
    |  Device IP  | Peer | Remote |Next Hop | Update   |  BFD   |          BFD            | Dev State  | App State |
    |             | Group|  ASN   |  Self   |Source IP |Enabled |[Interval,Rx,Multiplier] |            |           |
    +-------------+------+--------+---------+----------+--------+-------------------------+------------+-----------+
    | 10.20.246.16|  pg1 | 65002  | false   |          | false  |                         |provisioned |cfg-in-sync|
    +-------------+------+--------+---------+----------+--------+-------------------------+------------+-----------+
    | 10.20.246.15|  pg1 | 65002  | false   |          | false  |                         |provisioned |cfg-in-sync|
    +-------------+------+--------+---------+----------+--------+-------------------------+------------+-----------+
    BGP PeerGroup Details
    
    ================================================================================================================
  3. Run the following command for XCO consumption of OOB BGP Peer.
    (efa:root)root@node-2:~# efa tenant service bgp peer create --name ten1bgppeer1 --tenant ten1 --ipv4-uc-dyn-nbr 10.20.246.15,ten1vrf1:10.20.30.0/23,pg1,100 --ipv4-uc-dyn-nbr 10.20.246.15,ten1vrf1:10.20.40.0/23,pg1,100  --ipv4-uc-dyn-nbr 10.20.246.16,ten1vrf1:10.20.30.0/23,pg1,100 --ipv4-uc-dyn-nbr 10.20.246.16,ten1vrf1:10.20.40.0/23,pg1,50
    
    Error :  conflicting dynamic neighbors: [10.20.246.16,ten1vrf1:10.20.40.0/23,pg1,50] and [10.20.246.16,ten1vrf1:10.20.40.0/23,pg1,100]
    
    (efa:root)root@node-2:~# efa tenant service bgp peer create --name ten1bgppeer1 --tenant ten1 --ipv4-uc-dyn-nbr 10.20.246.15,ten1vrf1:10.20.30.0/23,pg1,100 --ipv4-uc-dyn-nbr 10.20.246.15,ten1vrf1:10.20.40.0/23,pg1,100  --ipv4-uc-dyn-nbr 10.20.246.16,ten1vrf1:10.20.30.0/23,pg1,100 --ipv4-uc-dyn-nbr 10.20.246.16,ten1vrf1:10.20.40.0/23,pg1,100
    
    BGP Peer created successfully.
    
    (efa:root)root@node-2:~# efa tenant service bgp peer show
    ===============================================================================================
    Name        : ten1bgppeer1
    Tenant      : ten1
    State       : bgp-peer-created
    
    +----------+----+----+-----+------+------+--------+---------+-------+------------------------+-----+-----+
    |Device IP |VRF |AFI |SAFI |Remote|Remote|Next Hop| Update  |  BFD  |          BFD           |Dev  |App  |
    |          |    |    |     |IP    |ASN   |  Self  |Source IP|Enabled|[Interval,Rx,Multiplier]|State|State|
    +----------+----+----+-----+------+------+--------+---------+-------+------------------------+-----+-----+
    Static Peer Details
    
    +--------------+---------+------+--------+--------------+------+------+------------+-----------+
    |  Device-IP   |  VRF    | AFI  |  SAFI  | Listen Range |Listen| Peer | Dev State  | App State |
    |              |         |      |        |              |Limit | Group|            |           |
    +--------------+---------+------+--------+--------------+------+------+------------+-----------+
    | 10.20.246.16 |ten1vrf1 | ipv4 | unicast| 10.20.30.0/23| 100  | pg1  |provisioned |cfg-in-sync|
    +--------------+---------+------+--------+--------------+------+------+------------+-----------+
    | 10.20.246.16 |ten1vrf1 | ipv4 | unicast| 10.20.40.0/23| 100  | pg1  |provisioned |cfg-in-sync|
    +--------------+---------+------+--------+--------------+------+------+------------+-----------+
    | 10.20.246.15 |ten1vrf1 | ipv4 | unicast| 10.20.30.0/23| 100  | pg1  |provisioned |cfg-in-sync|
    +--------------+---------+------+--------+--------------+------+------+------------+-----------+
    | 10.20.246.15 |ten1vrf1 | ipv4 | unicast| 10.20.40.0/23| 100  | pg1  |provisioned |cfg-in-sync|
    +--------------+---------+------+--------+--------------+------+------+------------+-----------+
    Dynamic Peer Details
    
    ===============================================================================================