Standard and Enhanced Policy Considerations

This section itemizes additional policy considerations for the stackable and standalone platforms, and provides a table cross-referencing standard and enhanced policy capability and policy capability to traffic classification rules.

Not all stackable fixed switch platforms support policy. On some stackable and standalone fixed switch platforms policy support requires a purchased license. See the software release notes that come with your device for policy support.

Standard and Enhanced Policy Capability Cross-Reference provides a listing of policy capabilities by standard and enhanced support level. Standard policy capabilities are further granulated based upon traffic classification support. See Policy Capability to Traffic Classification Rule Cross-Reference for a cross-reference of traffic classification to policy capability support.

Click to expand in new window

Standard and Enhanced Policy Capability Cross-Reference

Policy Support Level Policy Capability
Standard
  • Dynamic PID Assign Rule – The ability to dynamically assign a policy based upon a traffic classification (macsource and port-string). See Dynamic in the following table.
  • Admin PID Assign Rule – The ability to administratively assign a policy based upon a traffic classification (macsource and port-string). See Admin in the following table.
  • VLAN Forwarding – The ability to assign a forwarding VLAN rule through the default profile/role PVID only.
  • Deny – The ability to assign a drop traffic rule. See Drop in the following table.
  • Permit – The ability to assign a forward traffic rule. See Forward in the following table.
  • CoS Assign Rule – The ability to assign a CoS rule. See CoS in the following table.
  • Priority – The ability to assign traffic priority using a CoS assignment. See CoS in the following table.
  • Longest Prefix Rules – The ability to always look at the highest bit mask for an exact traffic classification match.
Enhanced
  • TCI Overwrite – The ability to overwrite user priority and other VLAN tag TCI field classification information.
  • Invalid Policy Action – The ability to set a drop, forward, or default-policy behavior based upon an invalid action.

The following table provides a cross-reference of standard ( ) and enhanced (X) policy capability to traffic classification rule.

Click to expand in new window

Policy Capability to Traffic Classification Rule Cross-Reference

Traffic Classification Rule Dynamic Admin VLAN CoS Drop Forward Syslog Trap Disable
MAC Source Address X X   X X X      
MAC Destination Address       X X X      
IPX Source Address       X X X      
IPv6 Destination Address       X X X      
IPX Destination Address                  
IPX Source Socket                  
IPX Destination Socket                  
IPX Transmission Control                  
IPX Type Field                  
IP Source Address       X X X      
IP Destination Address       X X X      
IP Fragmentation       X X X      
UPD Port Source       X X X      
UDP Port Destination       X X X      
TCP Port Source       X X X      
TCP Port Destination       X X X      
ICMP Packet Type                  
Time-To-Live (TTL)       X X X      
IP Type of Service       X X X      
IP Protocol       X X X      
Ether II Packet Type       X X X      
LLC DSAP/SSAP/CTRL                  
VLAN Tag                  
TCI-Overwrite                  
Port String X X   X X X