Configuration Overview
-
If MPLS will be used on a SummitStack, select the enhanced
protocol as described in GUID-F7817F25-C773-4FA5-ACED-360C6883733F.
-
If you want to use MPLS in a different VR (the default is
VR-Default), move MPLS to the appropriate VR as described in Moving MPLS From VR to VR.
-
Create and configure the VLANs that will use MPLS.
-
Configure an MPLS LSR ID for each switch that serves as an
LSR in the network. (See Configuring the MPLS LSR ID.)
-
Add MPLS support to the appropriate VLANs. (See Adding MPLS Support to VLANs.)
-
Enable MPLS on each switch that serves as an LSR. (See
Enabling and Disabling MPLS on an LSR.)
-
Enable MPLS on the appropriate VLANs. (See Enabling and Disabling MPLS on a VLAN.)
-
Enable LDP on each switch that serves as an LSR. (See
Enabling LDP on the Switch.)
-
Enable LDP on the appropriate VLANs. (See Enabling and Disabling LDP on a VLAN.)
-
Configure an IGP, such as OSPF or IS-IS, for the
appropriate switches and VLANs.