Layer 3 VPN Configuration Overview
To configure VR and VRF support for a Layer 3 VPN, do the following:
-
Configure the PE to PE interfaces as
follows:
-
Select the VR that to which the MPLS protocol
will be added.
-
Assign PE facing VLANs and ports to the VR.
-
Configure the PE to CE interface as follows:
-
Create a VPN VRF as described in Creating and Deleting VRFs.
-
Assign a VPN ID to the VPN VRF as described in Configuring a VPN ID.
-
Assign an RD to the VPN VRF as described in Configuring the Route Distinquisher.
-
Configure RTs for the VPN VRF as described in Configuring Route Targets.
-
Assign CE facing VLANs and ports to the VRF.
-
Configure BGP as described in GUID-032FFFDF-FF1B-43BE-BACA-061BEE6CE05B.
-
Configure BGP as described in GUID-032FFFDF-FF1B-43BE-BACA-061BEE6CE05B.