The following table describes the keys used to control the displays that appear if you use any of the show ports commands without specifying the no-refresh parameter (this is the default behavior).
Port Monitoring Display Keys with Auto-Refresh Enabled
| Key(s) | Description |
|---|---|
| U | Displays the previous page of ports. |
| D | Displays the next page of ports. |
| [Esc] | Exits from the screen. |
| 0 | Clears all counters. |
| [Space] | Cycles through the following screens:
Note: Available only using the show
ports utilization command.
|
The following table describes the keys used to control the displays that appear if you use any of the show ports commands and specify the no-refresh parameter.
Port Monitoring Display Keys with Auto-Refresh Disabled
| Key | Description |
|---|---|
| Q | Exits from the screen. |
| [Space] | Displays the next page of ports. |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB