The AP4020X comes with the AH-ACC-BKT-AX-TB mounting bracket that can be used to mount the access point on flat t-bar ceiling grids and flat surfaces, such as Prelude ceilings (15/16 in. ceiling grid), Suprafine ceilings (flat bottomed 9/16 in. ceiling grid), and walls. The ceiling tile sides must be flat.
The AP4020X has two integral antennas which cannot be removed. An integral antenna is fixed to the AP and cannot be disconnected. It is also called a fixed antenna or integrated antenna.
The AP4020X also supports up to four RPSMA antennas, which you can attach to the AP.
| Item | Description |
|---|---|
| Included with AP | |
| AI-TS06360 | 3.5dBi (2.4 GHz) and 5.5dBi (5 and 6 GHz) Indoor Dipole Tri-band with RP-SMA connector. Four (4) antennas ship with the AP. |
| Purchased Separately | |
| AI-TQ08055 | 8dBi Indoor Quad Sector 65 Degree Tri-band with RP-SMA |
| AIO-DQ15021-RPSMA | 15 dBi Indoor/Outdoor Sector 21 Deg, 36-inch cable, RPSMA |
| AIO-DD05120-RPSMA | Panel, 120 deg sector, 5dBi/5dBi, dual band, outdoor, 36-inch lead with 2 RP-SMA connectors |
| AIO-DD75060-RPSMA | Panel, 60 deg sector, 7.5dBi (2.4 GHz) and 7.5dBi (2.4GHz), dual band 36-inch lead with 2 RP-SMA connectors, outdoor rated |
| WS-AI-DQ05120 (30702) | Indoor, 2.3-2.7/4.9-6.1GHz, 4-feed, 5dBi, 120 degree sector antenna with standard RPSMA-type plug connector |
| ML-2452-SEC6M4-036 | Polarized Panel, Azimuth 100° Elevation Beamwidth 80 deg, 6.92dBi/ 7.3dBi, dual band, indoor 32" leads, 4 port RP-SMA plug connectors |
| AI-TQ06120 | 6dBi Indoor Quad Sector 120 Degree Tri-band with RP-SMA |
| Item | Description |
|---|---|
| AH-ACC-BKT-AX-TB |
Mounting bracket that can be used to mount the access point on flat surfaces such as Prelude ceilings (15/16 in. ceiling grid), Suprafine ceilings (flat bottomed 9/16 in. ceiling grid), and walls. Note: AH-ACC-BKT-AX-TB is included with the access point.
|
|
AH-ACC-BKT-AX-IL |
Mounting bracket for Interlude ceilings (9/16 in. wide T-bar with center protrusion). |
|
AH-ACC-BKT-AX-SL |
Mounting bracket for Silhouette ceilings (ceiling grid with 1/8 in. or 1/4 in. bottom opening). |
|
AH-ACC-BKT-AX-WL |
Mounting bracket for direct-to-wall installations when a 1.25 in. of space is desired between the wall and the access point. |
| ACC-BKT-TB-NF | Mounting bracket for 15/16 in. wide T-bars with sculpted ceiling tiles. |
| AH-ACC-BKT-916-KIT | Mounting bracket for 9/16 in. wide T-bars with sculpted ceiling tiles. |
| ACC-BKT-AX-BEAM |
Mounting bracket for beam mounting. |
|
ACC-BKT-AX-JB |
Mounting bracket for junction box or wall mounting. |
| ACC-BKT-AX-WNGADAPT | Adapter bracket for Cloud AP to WiNG Mounting Plate (#37201). Ships in a pack of 10. |
| ACC-BTK-AX-TBW | Mounting bracket for 1.5 in. wide extruded T-Bars with flat ceiling tiles. |
You can power the access point through the ETH0 RJ45 Ethernet port. But if you need to power the AP with an external power supply, you can purchase a 12V DC power supply.
| Part number | Description |
|---|---|
| 37219 | PWR 12V DC, 3A, 2.5mm x 5.5mm connector |
The following table shows the additional accessories available for your access point.
For more information, see the Wi-Fi6 11ax Accessories Installation Guide.
| Part number | Description |
|---|---|
|
ACC-WIFI-MICRO-USB |
Extreme Networks micro USB cable. Note: The console port can only be used with the Extreme Networks console cable. You could damage the AP if you use another cable.
Note: When you connect to the device using the micro USB Console port, the management station from which you connect to the device must have a VT100 emulation program, such as TeraTerm Pro (a free terminal emulator) or Hilgraeve HyperTerminal. Set your baud rate to 115200.
|